PLONVIT® NITRO
Descripción del producto
PLONVIT® NITRO es un fertilizante NPK (31/12/10) cristalino y soluble en agua con micronutrientes destinado a la aplicación foliar. También se puede utilizar para preparar una solución nutritiva para la fertirrigación de cultivos en el suelo.
PLONVIT® NITRO nutre eficazmente las plantas, intensifica la fotosíntesis, apoya el crecimiento y desarrollo adecuados de los órganos vegetativos y generativos. Se recomienda especialmente durante los períodos de mayor demanda de nitrógeno de las plantas, especialmente durante los períodos de crecimiento y desarrollo intensivo de las plantas, así como en condiciones de estrés de las plantas.
PLONVIT® NITRO aplicado en los momentos y dosis recomendados en los programas de alimentación foliar para especies de plantas individuales, complementa y/o corrige eficazmente la fertilización del suelo.
PLONVIT® NITRO contiene la tecnología patentada GCAA, que combina microelementos con el aminoácido glicina. La glicina es el aminoácido más pequeño y móvil de las plantas. Como resultado, los micronutrientes unidos a la glicina proporcionan nutrientes de manera más rápida y efectiva que las sales minerales, los óxidos o los fertilizantes basados en otros agentes complejantes.
| Nutrientes | g/kg | % (m/m) |
| Nitrógeno (N) total | 310 | 31.0 |
| Nitrógeno (N) urea (NH2) | 310 | 31.0 |
| El pentóxido de fósforo (P2O5) total | 120 | 12.0 |
| El pentóxido de fósforo (P2O5) soluble en agua | 120 | 12.0 |
| El pentóxido de fósforo (P2O5) soluble en solución neutra de citrato de amonio | 120 | 12.0 |
| Óxido de potasio (K2O) soluble en agua | 100 | 10.0 |
| Boro (B) en forma de sal de sodio | 0.3 | 0.03 |
| Cobre (Cu) como glicinato | 0.3 | 0.03 |
| Hierro (Fe) quelado por EDTA | 1.5 | 0.15 |
| Manganeso (Mn) como glicinato | 0.7 | 0.07 |
| Molibdeno (Mo) en forma de sal de amonio | 0.02 | 0.002 |
| Zinc (Zn) como glicinato | 0.7 | 0.07 |
Instrucciones de uso
PLONVIT® NITRO se puede utilizar en diferentes técnicas de fertilización, incluidas las pulverizaciones foliares y la fertirrigación en el suelo.
- PULVERIZACIONES FOLIARES
PLONVIT® NITRO está destinado a la aplicación foliar en forma de solución acuosa.
Las recomendaciones detalladas para la aplicación foliar se presentan en la siguiente tabla.®
- FERTIRRIGACIÓN (fertilización con riego) de cultivos en el suelo, en sustratos de turba y suelos de jardín (la solución nutritiva se administrará periódicamente, repetidamente durante la temporada de crecimiento).
Las recomendaciones específicas (composición de la solución nutritiva y frecuencia de aplicación) tendrán en cuenta las necesidades nutricionales de los vegetales, los resultados del análisis químico del agua utilizada para la fertirrigación y del suelo (sustrato), así como las condiciones meteorológicas.
Utilizar PLONVIT® NITRO como solución acuosa a una concentración del 0,03-0,2% (0,3-2,0 kg de fertilizante en 1.000 litros de solución nutritiva lista para usar).
Cuando utilice PLONVIT® NITRO en una solución nutritiva junto con otros fertilizantes, no exceda una concentración combinada del 0,2% de todos los ingredientes de la solución que se dosifica.
Al preparar soluciones concentradas, la dosis de fertilizante se incrementará en consecuencia.
Preparar soluciones concentradas de fertilizantes PLONVIT NPK en un tanque diferente al de la solución concentrada de fertilizante cálcico.
Anuncio 1. Recomendaciones de aplicación foliar para cultivos seleccionados.
Las recomendaciones pueden modificarse teniendo en cuenta los requisitos y las condiciones de crecimiento de las plantas.
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ Autumn: 3–4 leaves unfolded The application time should be considered as optimal in case of poor plant condition. |
2–5 kg/ha |
| ◆ Spring: tillering | 2–5 kg/ha |
| ◆ stem elongation | 2–5 kg/ha |
| ◇ flag leaf stage / beginning of heading | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf development – tillering | 2–5 kg/ha |
| ◆ stem elongation | 2–5 kg/ha |
| ◇ flag leaf stage / beginning of heading | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ Autumn: 3–4 leaves unfolded The application time should be considered as optimal in case of poor plant condition. |
2–5 kg/ha |
| ◆ Spring: tillering | 2–5 kg/ha |
| ◆ stem elongation | 2–5 kg/ha |
| ◇ flag leaf stage / beginning of heading | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf development – tillering | 2–5 kg/ha |
| ◆ stem elongation | 2–5 kg/ha |
| ◇ flag leaf stage / beginning of heading | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ Autumn: leaf development – until beginning of tillering The treatment should be considered as optimal in case of poor plant condition. |
2–5 kg/ha |
| ◆ Spring: beginning of stem elongation | 2–5 kg/ha |
| ◆ flag leaf stage – until first awns visible | 2–5 kg/ha |
| ◇ end of flowering – until medium milk stage of grain ripening | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf development – until beginning of stem elongation | 2–5 kg/ha |
| ◆ flag leaf stage – until first awns visible | 2–5 kg/ha |
| ◇ end of flowering – until medium milk stage of grain ripening | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ Autumn: leaf development – until beginning of tillering The treatment should be considered as optimal in case of poor plant condition. |
2–5 kg/ha |
| ◇/◆ Spring: beginning of stem elongation The treatment should be considered as optimal in case of poor plant condition. |
2–5 kg/ha |
| ◇ flag leaf stage – until first awns visible | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ leaf development – until beginning of stem elongation | 2–5 kg/ha |
| ◇ flag leaf stage – until first awns visible | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ Autumn: leaf development – until beginning of tillering The treatment should be considered as optimal in case of poor plant condition. |
2–5 kg/ha |
| ◆ Spring: beginning of stem elongation | 2–5 kg/ha |
| ◆ flag leaf stage – until beginning of heading | 2–5 kg/ha |
| ◇ end of flowering – until early milk | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf development – until beginning of stem elongation | 2–5 kg/ha |
| ◆ flag leaf stage – until beginning of heading | 2–5 kg/ha |
| ◇ end of flowering – until early milk | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf development – tillering | 2–5 kg/ha |
| ◆ stem elongation – until flag leaf stage | 2–5 kg/ha |
| ◇ end of flowering – until early milk | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| Autumn: ◇/◆ 4–6 leaves unfolded The treatment should be considered as optimal in case of poor plant condition. |
2–5 kg/ha |
| Spring: ◆ beginning of main stem elongation |
2–5 kg/ha |
| ◆ bud formation – until beginning of flowering: 1–2 treatments every 5–10 days | 2–5 kg/ha |
| ◇/◆ from the beginning of petal fall – until the beginning of pods development The treatment should be considered as optimal (on” older petals falling”) in case of poor plant condition or insufficient nitrogen availability to produce maximum yield. |
2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf development – until beginning of main stem elongation | 2–5 kg/ha |
| ◆ bud formation – until beginning of flowering: 1–2 treatments every 5–10 days | 2–5 kg/ha |
| ◇/◆ from the beginning of petal fall – until the beginning of pods development The treatment should be considered as optimal (on” older petals falling”) in case of poor plant condition or insufficient nitrogen availability to produce maximum yield. |
2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 2–3 pairs of leaves (BBCH 14–16) | 2–5 kg/ha |
| ◆ stem elongation (BBCH 30–35) | 2–5 kg/ha |
| ◇ inflorescence development (BBCH 51–55) | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf development on the main stem (BBCH 14–16) | 2–5 kg/ha |
| ◆ stem growth (BBCH 30–39) | 2–5 kg/ha |
| ◇ inflorescence development (BBCH 51–55) | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 2–6 leaves unfolded (4 leaves is the optimum stage for treatment) | 2–5 kg/ha |
| ◆ 7–8 leaves unfolded | 2–5 kg/ha |
| ◇ stem elongation – until beginning of tassel formation | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ beginning of leaf development | 2–5 kg/ha |
| ◆ beginning of crop cover | 2–5 kg/ha |
| ◇ beginning of storage root development | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ beginning of growth of shoots and leaves (plant height about 10 cm) | 2–5 kg/ha |
| ◆ growth of shoots and leaves (plant height ˃15 cm) | 2–5 kg/ha |
| ◇ tubers reach ca. 50% of the final mass | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ first trifoliate leaf development The application time should be considered as optimal when plants are grown on soils with a pH <6.5 or when poor nodulation is expected. |
2–5 kg/ha |
| ◇ beginning of flower bud development | 2–5 kg/ha |
| ◇/◆ beginning of pod and seed development The application time should be considered as optimal in case photosynthesis limited by unfavorable weather conditions or in the case of poor nodulation. |
2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ first true leaf development The application time should be considered as optimal when plants are grown on soils with a pH <6.5 or when poor nodulation is expected. |
2–5 kg/ha |
| ◇ beginning of flower bud development | 2–5 kg/ha |
| ◇/◆ beginning of pod and seed development The application time should be considered as optimal in case photosynthesis limited by unfavorable weather conditions or in the case of poor nodulation. |
2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ first true leaf development The application time should be considered as optimal when plants are grown on soils with a pH <6.5 or when poor nodulation is expected. |
2–5 kg/ha |
| ◇ beginning of flower bud development | 2–5 kg/ha |
| ◇/◆ beginning of pod and seed development The application time should be considered as optimal in case photosynthesis limited by unfavorable weather conditions or in the case of poor nodulation. |
2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ first true leaf development The application time should be considered as optimal when plants are grown on soils with a pH <6.5 or when poor nodulation is expected. |
2–5 kg/ha |
| ◇ beginning of flower bud development | 2–5 kg/ha |
| ◇/◆ beginning of pod and seed development The application time should be considered as optimal in case photosynthesis limited by unfavorable weather conditions or in the case of poor nodulation. |
2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ first true leaf development The application time should be considered as optimal when plants are grown on soils with a pH <6.5 or when poor nodulation is expected. |
2–5 kg/ha |
| ◇ beginning of flower bud development | 2–5 kg/ha |
| ◇/◆ beginning of pod and seed development The application time should be considered as optimal in case photosynthesis limited by unfavorable weather conditions or in the case of poor nodulation. |
2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ first true leaf development The application time should be considered as optimal when plants are grown on soils with a pH <6.5 or when poor nodulation is expected. |
2–5 kg/ha |
| ◇ beginning of flower bud development | 2–5 kg/ha |
| ◇/◆ beginning of pod and seed development The application time should be considered as optimal in case photosynthesis limited by unfavorable weather conditions or in the case of poor nodulation. |
2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ first true leaf development The application time should be considered as optimal when plants are grown on soils with a pH <6.5 or when poor nodulation is expected. |
2–5 kg/ha |
| ◇ beginning of flower bud development | 2–5 kg/ha |
| ◇/◆ beginning of pod and seed development The application time should be considered as optimal in case photosynthesis limited by unfavorable weather conditions or in the case of poor nodulation. |
2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ first true leaf development The application time should be considered as optimal when plants are grown on soils with a pH <6.5 or when poor nodulation is expected. |
2–5 kg/ha |
| ◇ beginning of flower bud development | 2–5 kg/ha |
| ◇/◆ beginning of pod and seed development The application time should be considered as optimal in case photosynthesis limited by unfavorable weather conditions or in the case of poor nodulation. |
2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ rosette development The application time should be considered as optimal when plants are grown on soils with a pH <6.5 or when poor nodulation is expected. |
2–5 kg/ha |
| ◇ beginning of flower bud development | 2–5 kg/ha |
| ◇/◆ beginning of pod and seed development The application time should be considered as optimal in case photosynthesis limited by unfavorable weather conditions or in the case of poor nodulation. |
2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 3–6 leaves (BBCH 13–16) | 2–5 kg/ha |
| ◆ beginning of tillering until beginning of stem elongation (BBCH 21–32) | 2–5 kg/ha |
| ◇ stem elongation until beginning of tassel formation (BBCH 31–51) | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 4–9 leaves (BBCH 14–19) | 2–5 kg/ha |
| ◆ stem elongation (BBCH 31–33) | 2–5 kg/ha |
| ◇ stem elongation until beginning of tassel development (BBCH 35–51) | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf development – tillering | 2–5 kg/ha |
| ◆ beginning of stem formation | 2–5 kg/ha |
| ◇ stem elongation | 2–5 kg/ha |
| ◇ beginning of panicle emergence | 2–5 kg/ha |
| ◆ early milk | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ beginning of leaf development | 2–5 kg/ha |
| ◆ beginning of side shoots formation | 2–5 kg/ha |
| ◇ beginning of flower bud development | 2–5 kg/ha |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ green bud stage | Foliar treatments – single dose 2-5 kg/ha. |
| ◆ pink bud stage | |
| ◆ end of flowering: majority of petals fallen | |
| ◆ beginning of fruit development | |
| ◆ fruit reaches 30–50% of typical size | |
| ◇ after harvest |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ green bud stage | Foliar treatments – single dose 2-5 kg/ha. |
| ◇ after harvest |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ Spring: leaf development | Foliar treatments – single dose 2-5 kg/ha. |
| ◇ Spring/summer: growth of main stem and side shoots |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 1st year – spring (after plant adaptation in the field): beginning of leaf development | Foliar treatments – single dose 2-5 kg/ha. |
| ◆ 1st year – summer (about 3–4 weeks after budding): end of shoot and leaf growth | |
| ◆ 2nd year – spring (after cutting the rootstock above the budding place): beginning of shoot and leaf development | |
| ◆ 2nd year – spring/summer: growth of main stem and side shoots |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 1st year – spring (after plant adaptation in the field): beginning of leaf development | Foliar treatments – single dose 2-5 kg/ha. |
| ◆ 1st year – summer: growth of main stem and leaf development | |
| ◆ 2nd year – spring (10–14 days after cutting the main stem at a height of approx. 60–65 cm.): beginning of shoot and leaf development | |
| ◆ 2nd year – spring/summer: growth of main stem and side shoot |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ green bud stage | Foliar treatments – single dose 2-5 kg/ha. |
| ◆ white bud stage | |
| ◆ end of flowering: majority of petals fallen | |
| ◆ beginning of fruit development | |
| ◆ fruit reaches 30–50% of typical size | |
| ◇/◆ after harvest The application time should be considered as optimal in case of poor condition of trees after fruit harvest. |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ green bud stage | Foliar treatments – single dose 2-5 kg/ha. |
| ◇/◆ after harvest The application time should be considered as optimal in case of poor condition of trees after fruit harvest. |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ inflorescence emergence | Foliar treatments – single dose 2–5 kg/ha |
| ◆ fruitlet development | |
| ◇ the fruit reaches about half of final size | |
| ◆ after harvest: 2–3 treatments every 10–14 days |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◇ after harvest: 2–3 treatments every 10–14 days | Foliar treatments – single dose 2–5 kg/ha |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ inflorescence emergence | Foliar treatments – single dose 2–5 kg/ha |
| ◆ fruitlet development | |
| ◇ the fruit reaches about half of final size | |
| ◆ after harvest: 2–3 treatments every 10–14 days |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◇ after harvest: 2–3 treatments every 10–14 days | Foliar treatments – single dose 2–5 kg/ha |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ inflorescence emergence | Foliar treatments – single dose 2–5 kg/ha |
| ◆ fruitlet development | |
| ◇ the fruit reaches about 30% of final size | |
| ◆ after harvest: 1–2 treatments every 7–10 days |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ inflorescence emergence | Foliar treatments – single dose 2–5 kg/ha |
| ◆ fruitlet development | |
| ◇ the fruit reaches about 30% of final size | |
| ◆ after harvest: 1–2 treatments every 7–10 days |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ inflorescence emergence | Foliar treatments – single dose 2–5 kg/ha |
| ◆ fruitlet development | |
| ◇ the fruit reaches about 30% of final size | |
| ◆ after harvest: 1–2 treatments every 7–10 days |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ inflorescence emergence | Foliar treatments – single dose 2–5 kg/ha |
| ◆ fruitlet development | |
| ◇ the fruit reaches about 30% of final size | |
| ◆ after harvest: 1–2 treatments every 7–10 days |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ sprouting / bud development Treatment should be considered as optimal when N uptake from soil is reduced (drought, soil pH above 7,5) |
2–5 kg/ha |
| ◇/◆ beginning of flower bud development Treatment should be considered as optimal when N uptake from soil is reduced (drought, soil pH above 7,5) |
2–5 kg/ha |
| ◆ beginning of fruit development | 2–5 kg/ha |
| ◆ beginning of fruit colouring | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ bud break | 2–5 kg/ha |
| ◆ new shoot development | 2–5 kg/ha |
| ◇ inflorescence emergence | 2–5 kg/ha |
| ◆ beginning of flowering | 2–5 kg/ha |
| ◆ beginning of fruit development | 2–5 kg/ha |
| ◆ fruit flesh development (beginning of oil production) | 2–5 kg/ha |
| ◆ beginning of fruit coloration – picking of green olives | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf and shoot development | 2–5 kg/ha |
| ◇/◆ inflorescence development The treatment should be considered as optimal in case of poor plant condition. |
2–5 kg/ha |
| ◆ pinhead | 2–5 kg/ha |
| ◆ intensive growth of fruit | 2–5 kg/ha |
| ◆ maturation | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf and shoot development (BBCH 13–19) | 2–5 kg/ha |
| ◆ shoot development (BBCH 31–39) | 2–5 kg/ha |
| ◇ fruit development (BBCH 71–75) | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf and shoot development (BBCH 13–19) | 2–5 kg/ha |
| ◆ shoot development (BBCH 31–39) | 2–5 kg/ha |
| ◇ fruit development (BBCH 71–75) | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf development (BBCH 14–19) | 2–5 kg/ha |
| ◆ beginning of stem growth (BBCH 31–33) | 2–5 kg/ha |
| ◇ fruit development (BBCH 71–75) | 2–5 kg/ha |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ Spring: after start of growing season – bud burst | Foliar treatments – single dose 2–5 kg/ha |
| ◆ leaf development – until beginning of inflorescence emergence | |
| ◆ immediately after harvest |
Plantations without fertigation
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf and shoot growth: 2–3 treatments every 14–21 days | Foliar treatments – single dose 2–5 kg/ha |
| ◇ beginning of the first inflorescence emergence | |
| ◇ beginning of the first fruit development |
Fertigated plantations
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ leaf and shoot growth: 2–3 treatments every 14–21 days The application time should be considered as optimal if fertigation is not an available option. | Foliar treatments – single dose 2–5 kg/ha |
Plantations without fertigation
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf and shoot growth: 2 treatments every 10–14 days | Foliar treatments – single dose 2–5 kg/ha |
| ◆ beginning of inflorescence emergence | |
| ◇ beginning of the development | |
| ◆ immediately after harvest: 1–2 treatments every 10–21 days, before bud formation for the next growing season |
Fertigated plantations Foliar treatments – single dose 2–5 kg/ha
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ leaf and shoot growth: 2 treatments every 10–14 days The application time should be considered as optimal if fertigation is not an available option. | Foliar treatments – single dose 2–5 kg/ha |
| ◇ immediately after harvest: 1–2 treatments every 10–21 days, before bud formation for the next growing season |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf and shoot development: 1–2 treatments every 10–14 days | Foliar treatments – single dose 2–5 kg/ha. |
| ◆ beginning of inflorescence emergence | |
| ◇ beginning of fruit development | |
| ◆ immediately after harvest: 1–2 treatments every 10–21 days, before bud formation for the next growing season |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆/◇leaf and shoot development: 1–2 treatments every 10–14 days. The application time should be considered as optimal if fertigation is not an available option. | Foliar treatments – single dose 2–5 kg/ha. |
| ◇ immediately after harvest: 1–2 treatments every 10–21 days, before bud formation for the next growing season |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ bud development | Foliar treatments – single dose 2–5 kg/ha |
| ◆ beginning of leaf development and inflorescence emergence | |
| ◆ inflorescence emergence until beginning of flowering | |
| ◇ end of flowering / beginning of fruit development | |
| ◆ post-harvest: 1–2 treatments every 14–21 days |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ beginning of leaf and new shoot development | 2–5 kg/ha |
| ◆ inflorescence emergence | 2–5 kg/ha |
| ◆ fruit development – until berries pea-sized: 1–2 treatments every 10–14 days | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ Spring: leaf and crown development | 2–5 kg/ha |
| ◆ Summer: further vegetative development and bud initiation for next season | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ Spring: after start of growing season – leaf development | 2–5 kg/ha |
| ◆ balloon stage (forming of „hollow ball”) | 2–5 kg/ha |
| ◆ beginning of flowering | 2–5 kg/ha |
| ◇ beginning of the first fruit development | 2–5 kg/ha |
| ◆ after fruit harvest, 1–2 treatments every 10–21 days In the case of cutting leaves, the treatment should be done in the phase of 2–3 new leaves developed. |
2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ Spring: leaf development | 2–5 kg/ha |
| ◆ Spring: beginning of runner growth | 2–5 kg/ha |
| ◆ Beginning of summer: elongation growth of runners and rosette plantlets set on the runners | 2–5 kg/ha |
| ◆ Summer: development, growth and rooting of plantlets | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ FIELD GROWN NURSERY PLANTATIONS – spring: leaf development | 2–5 kg/ha |
| ◆ FIELD GROWN NURSERY PLANTATIONS – spring: beginning of runner growth | 2–5 kg/ha |
| ◆ FIELD GROWN NURSERY PLANTATIONS – beginning of summer: elongation growth of runners and rosette plantlets set on the runners | 2–5 kg/ha |
| ◇ GREEN POTTED PLANTLETS: 2nd–3rd day after planting of cuttings | watering: 0,05–0,1% solution or spraying: 0,25–0,3% solution |
| ◆ GREEN POTTED PLANTLETS: 5th–7th day after planting of cuttings | watering: 0,05–0,1% solution or spraying: 0,25–0,3% solution |
| ◇ GREEN POTTED PLANTLETS: 14th–21st day after planting of cuttings | watering: 0,05–0,1% solution or spraying: 0,25–0,3% solution |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ Spring: leaf development | 2–5 kg/ha |
| ◆ Spring: beginning of runner growth | 2–5 kg/ha |
| ◆ Beginning of summer: elongation growth of runners and rosette plantlets set on the runners | 2–5 kg/ha |
| ◆ Summer: development, growth and rooting of plantlets | 2–5 kg/ha |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ after seedling adaptation to the field conditions | Foliar treatments – single dose 2–5 kg/ha. |
| ◆ intensive plant growth | |
| ◆ beginning of inflorescence emergence | |
| ◆ beginning of flowering | |
| ◇ fruit development |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◇ after seedling adaptation to the field conditions | Foliar treatments – single dose 2–5 kg/ha. |
| ◇ intensive plant growth |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ after seedling adaptation to the field conditions | Foliar treatments – single dose 2–5 kg/ha. |
| ◆ intensive plant growth | |
| ◆ the first flower bud emergence | |
| ◆ beginning of flowering | |
| ◇ beginning of fruit development |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◇ after seedling adaptation to the field conditions | Foliar treatments – single dose 2–5 kg/ha. |
| ◇ intensive plant growth | |
| ◇ the first flower bud emergence |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf development: 1–2 treatments every 7–14 days | Watering – 0.05–0.1% solution or spraying – 0.25–0.3% solution. |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 3–6 leaves unfolded | Foliar treatments – single dose 2–5 kg/ha |
| ◆ intensive plant growth: 1–2 treatments every 7–10 days | |
| ◇ after the first harvest |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 3–6 leaves unfolded | Foliar treatments – single dose 2–5 kg/ha |
| ◆ intensive plant growth: 1–2 treatments every 7–10 days | |
| ◇ after the first harvest |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 3–6 leaves unfolded | Foliar treatments – single dose 2–5 kg/ha |
| ◆ intensive plant growth: 1–2 treatments every 7–10 days | |
| ◇ after the first harvest |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 3–6 leaves unfolded | Foliar treatments – single dose 2–5 kg/ha |
| ◆ intensive plant growth: 1–2 treatments every 10–14 days | |
| ◇ beginning of fruit development | |
| ◇ growth of fruits |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 3–6 leaves unfolded | Foliar treatments – single dose 2–5 kg/ha |
| ◆ intensive plant growth: 1–2 treatments every 10–14 days | |
| ◇ beginning of fruit development | |
| ◇ growth of fruits |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 3–6 leaves unfolded | Foliar treatments – single dose 2–5 kg/ha |
| ◆ intensive plant growth: 1–2 treatments every 10–14 days | |
| ◇ beginning of fruit development | |
| ◇ growth of fruits |
| Application times for foliar treatments(◆ optimal, ◇ optional): | Direction for use: |
| ◇ growth of leaves | Watering – 0.05–0.1% solution
or spraying – 0.25–0.3% solution. |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 3rd–5th leaf clearly visible | Foliar treatments – single dose 2–5 kg/ha |
| ◆ growth of leaves | |
| ◆ beginning of onion bulb formation | |
| ◇ bulb of onion reach 30–50% of the expected size |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ growth of leaves: 2 treatments every 7–14 days | Foliar treatments – single dose 2–5 kg/ha |
| ◆ beginning of onion bulb formation | |
| ◇ bulb of onion reach 30–50% of the expected size |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 3rd–5th leaf clearly visible | Foliar treatments – single dose 2–5 kg/ha |
| ◆ growth of leaves | |
| ◆ beginning of onion bulb formation | |
| ◇ bulb of onion reach 30–50% of the expected size |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◇ growth of leaves – until beginning of onion bulb formation | Foliar treatments – single dose 2–5 kg/ha |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 3rd–5th leaf clearly visible | Foliar treatments – single dose 2–5 kg/ha |
| ◆ growth of leaves | |
| ◆ beginning of garlic bulb formation | |
| ◇ bulb of garlic reaches 30–50% of the expected size |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ beginning of growth of plants: 3 treatments every 7–14 days | Foliar treatments – single dose 2–5 kg/ha |
| ◇ harvestable plant part reaches 30–50% of the typical size |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ growth of leaves: 1–2 treatments every 7–10 days | Watering – 0.05–0.1% solution or spraying – 0.25–0.3% solution |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ after seedling adaptation to field conditions | Foliar treatments – single dose 2–5 kg/ha |
| ◆ growth of leaves | |
| ◇ beginning of the flower head development |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ after seedling adaptation to field conditions | Foliar treatments – single dose 2–5 kg/ha |
| ◆ growth of leaves | |
| ◇ beginning of the flower head development |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ after seedling adaptation to field conditions – leaf development | 2–5 kg/ha |
| ◆ growth of leaves | 2–5 kg/ha |
| ◆ beginning of the head formation: 2 treatments every 14–21 days | 2–5 kg/ha |
| ◇ head reaches approx. 50% of the typical size | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ after seedling adaptation to field conditions – leaf development | 2–5 kg/ha |
| ◆ growth of leaves | 2–5 kg/ha |
| ◆ beginning of the head formation: 2 treatments every 14–21 days | 2–5 kg/ha |
| ◇ head reaches approx. 50% of the typical size | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ after seedling adaptation to field conditions – leaf development | 2–5 kg/ha |
| ◆ growth of leaves | 2–5 kg/ha |
| ◆ beginning of the head formation: 2 treatments every 14–21 days | 2–5 kg/ha |
| ◇ head reaches approx. 50% of the typical size | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ after seedling adaptation to field conditions – leaf development | 2–5 kg/ha |
| ◆ growth of leaves | 2–5 kg/ha |
| ◆ beginning of the head formation: 2 treatments every 14–21 days | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ after seedling adaptation to field conditions – leaf development | 2–5 kg/ha |
| ◆ growth of the main stem and leaves | 2–5 kg/ha |
| ◆ beginning of axillary bud (‘sprouts’) formation | 2–5 kg/ha |
| ◇ approx. 50% of ‘sprouts’ are formed | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ after seedling adaptation to field conditions – leaf development | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ after plant emergence – leaf development | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ after seedling adaptation to field conditions – leaf development | 2–5 kg/ha |
| ◆ growth of the main stem and leaves | 2–5 kg/ha |
| ◇ approx. 50% of the leaf mass formed | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ first true leaf development: 1–2 treatments every 7–10 days | watering 0.05–0.1% solution spraying 0.25–0.3% solution |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 3–4 true leaves (BBCH 13–14) | 2–5 kg/ha |
| ◆ 5 true leaves / root begins to expand until root reaches 20% of typical diameter (BBCH 15/41–42) | 2–5 kg/ha |
| ◇ root reaches 30–40% of typical diameter (BBCH 43–44) | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 3–4 true leaves (BBCH 13–14) | 2–5 kg/ha |
| ◆ 5 true leaves / root begins to expand until root reaches 20% of typical diameter (BBCH 15/41–42) | 2–5 kg/ha |
| ◇ root reaches 30–40% of typical diameter (BBCH 43–44) | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 3–4 true leaves (BBCH 13–14) | 2–5 kg/ha |
| ◆ 5 true leaves / root begins to expand until root reaches 20% of typical diameter (BBCH 15/41–42) | 2–5 kg/ha |
| ◇ root reaches 30–40% of typical diameter (BBCH 43–44) | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| Seedling ◇ 2–3 true leaves (BBCH 12–13) |
watering 0.05–0.1% solution spraying 0.25–0.3% solution |
| Field-grown ◆ 7–8 true leaves (BBCH 17–18) |
2–5 kg/ha |
| ◆ 9 true leaves / root begins to expand until root reaches 20% of typical diameter (BBCH 19/41–42) | 2–5 kg/ha |
| ◇ root reaches 30–40% of typical diameter (BBCH 43–44) | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 2–4 true leaves / 1–2 pairs of leaves (BBCH 12–14) | 2–5 kg/ha |
| ◆ 5 true leaves / beginning of crop cover (BBCH 15/31) | 2–5 kg/ha |
| ◇ storage root begins to develop, diameter above 2 cm (BBCH 41–43) | 2–5 kg/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ in spring and summer, 2–4 treatments every 7–14 days (the last treatment to be performed by the end of summer at the latest) | watering 0.05–0.1% solution spraying 0.25–0.3% solution |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ in spring and summer, 2–4 treatments every 7–14 days (the last treatment to be performed by the end of summer at the latest) | watering 0.05–0.1% solution spraying 0.25–0.3% solution |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ every 7–14 days, starting from the early vegetative stages | watering 0.05–0.1% solution spraying 0.25–0.3% solution |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ every 7–14 days, starting from spring until autumn | watering 0.05–0.1% solution spraying 0.25–0.3% solution |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ after vegetation had started | watering 0.05–0.1% solution spraying 0.25–0.3% solution |
| ◆ in spring and summer, 4–5 treatments after lawn mowing (the last treatment to be performed by the end of summer at the latest) | watering 0.05–0.1% solution spraying 0.25–0.3% solution |
